Phoenix Gold Land Rover 'New' Defender Speaker Upgrade

Phoenix GoldSKU: ZDSKL1
In stock
£250

Shipping calculated at checkout

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

New Defender Speaker Upgrade

The Phoenix Gold Land Rover Defender Speaker Kit is a 6.5-inch 2-way component speaker kit that’s designed to fit directly into the same location as the OEM front and/or rear door speakers, breathing fresh life into any lower-spec L663 Defender fitted with the ‘Standard Audio (Base)’ (non-Meridian) audio setup.

Amplify your L663 Defender

Engineered by Phoenix Gold with precision and designed for simplicity, these component speakers not only amplify your listening experience but also ensure an effortless installation process. This upgrade is doubly beneficial on the Defender Hardtop models that come equipped with a front speaker set-up only.

How do I tell whether I have the base level audio? If your speakers don’t display the Meridian logo, then you have the base audio system in your Defender.

Replaces woofers and tweeters

Each ZDSKL1 kit includes a pair of replacement 6.5in 150w (75w RMS) Phoenix Gold door speakers for improved mid & bass to replace the standard 6.5in door speaker (LR096615) and a pair of 20mm tweeters replace the standard door tweeters (LR025875).

Pair With

Here you'll find parts that relate to the product page you're currently viewing. They may be listed in the product description as additional components you will need, or simply a helpful suggestion for other parts along a similar theme.

Huge improvements

Straight out of the box the difference in quality between the Phoenix Gold speaker and the factory fit speaker is instantly apparent. Speaker impedance is rated at 4-ohms rather than the cheap and cheerful 2-ohm spec units Land Rover fits.

Massive size difference

The ZX 6.5in speaker comes in at 1.1kg heavier than the standard Land Rover speaker. The ZX speaker is rated at 150w (max) and 75w (RMS). Check out the size difference in the magnets!

No trim or bodywork modifications

No bodywork or door trim modifications need to be made in order to replace the standard speakers. A set of trim tools and a selection of Torx bits is all you’ll need to install the kit yourself. See the resources section for comprehensive fitting instructions.

Mounting adaptors and looms included

The kit contains Defender specific speaker mounting adaptors for the 6.5in door speakers and Defender specific mounting adaptors for the tweeters.

Plug & Play connectors plug directly inline between the Land Rover audio wiring and the speakers. No modifications need to be made to your Defender wiring.

What do I need to equip my Defender?

1x ZDSKL1 speaker kit will replace the front speakers in all Defender models. This kit is also suitable for replacing the rear door speaker set-up if your vehicle has factory fit tweeters. If you wish to equip both front and rear speakers in your Defender you will require x2 kits.

Base Level audio models only have 6.5in rear speakers and do not have any provision for rear tweeters, nor is the car equipped with pre-installed wiring for the rear tweeters.

Note: The Commercial 90 & 110 ‘Hardtop’ Defender models are only equipped with a front speaker set-up.

Specification

Speaker Type: 2-Way Speaker System
Speaker Size: 6.5″ (165mm) Mid-bass / 0.78″ (20mm) Tweeter
Impedance: 4ohms
Frequency Response: 60Hz – 20kHz
Power Handling (RMS): 75W
Power Handling (MAX): 150W
Sensitivity: 89dB (1W/1m)

Kit Contains Mounting Adaptor rings for the 6.5” door speakers and the 20mm tweeters Plug & Play Low pass Filter for mid-range speaker & Land Rover audio wiring adaptor Plug & Play High pass Filter for the tweeter & Land Rover audio wiring adaptor.

Recently viewed