MUD Puma Pod


Be the first to review this product

Part Number- Puma Pod (Blank) MUD-PP-B

MUD Puma Pod



MUD Puma Pod

£25 ex VAT

The MUD Puma Pod provides a solution to fitting extra switches and controls into the  2.4 & 2.2 Tdci (Puma) Defender dashboard.  The MUD Puma Pod is supplied as a blank moulding with no cut-out.

The MUD Puma Pod is fastened to the top surface of the Tdci Dashboard using plastic rivets. The Puma Pod Moulding uses a CAD manufacturing process to precisely follow the Tdci dashboard profile.

The footprint of the MUD Puma Pod measures 270mm x 107mm

The maximum width/height of the fascia is 245mm x 75mm

The MUD Puma Pod attaches to the top off the dashboard using plastic rivets. 

Fixing holes will have to be drilled into the top of the dashboard for the fixings. An additional hole is required in the pen-tray in the top of the Puma Dashboard in order to route wiring etc.


Will the Puma Pod fit my Tdi/Td5 Defender?

Yes and No!

The depth of the Puma Pod means the rear of the pod will overhang the top dashboard surface nearest the windscreen. The front of the moulding has been profiled to follow the contours of the Tdci dashboard. This means when the Puma Pod is fitted onto the top of the earlier Defender dashboard it will leave a gap between the Pod and the dashboard. Because the rear of the Pod will overhang the dashboard only two of the four fixings can be used.

Theoretically the Puma Pod can be made to fit the earlier model dashboard but in our opinion the end result is less than ideal.