MUD Defender Console £55.00
The MUD Centre Console solves the problem of where to mount those
extra switches and gauges in the Defender dashboard without having to resort to
a homemade DIY dashboard.
The MUD Defender Console is supplied as a blank moulding to provide the user
with the flexibility to create their own unique dash layout that best satisfies their requirements.

|
Each MUD Console comes complete with a steel mounting frame including
end-plates, all fixings required and an easy-to-follow fully illustrated
step-by-step fitting guide.
The recesses within the MUD Console will accept the standard sized 52mm auxiliary gauges and/or the popular Durite/Eaton modular 'New Generation'
switches (illustrated) as well as Carling Technologies 'Contura II' switches.
Both the upper and lower central recessed mouldings are wide enough to accept up to
three 52mm gauges or up to seven of the
Carling Technologies switches. For a seven switch installation using the Carling interlocking mounts, use two interlocking ends and five interlocking centres. |
|
 |
The two circular mouldings within the console provide a neat method of
relocating the standard rear-wash wipe switch (if fitted) and the 12v
cigar lighter/power socket. Our
heavy-duty Marine grade 12v
sockets will also fit into the recess.
|
|
 |
 |
|
The unique design of the MUD Centre Console allows you to mount your DIN
sized CD/Tuner head unit into one of two positions within the console and
still leave plenty of room for all those ancillaries while at the same
time presenting a factory look and a quality finish. |
|

Head unit mounted in upper position |

Head unit mounted in lower position |
|
The sides of the MUD Console are wide enough to accept a 52mm gauge or
up to two of the Carling Technologies switches
For that finishing touch, the MUD Console is fitted with an additional
recessed oval moulding designed to accept many of the Land Rover logo
badges used on or around Land Rovers over the years. We offer a selection of
Land Rover Genuine Parts oval logos to compliment the MUD
Console perfectly. The Matt Black badge costs £2.00. The Black/Silver &
Green/Gold gloss enamel options cost £4.99
|
 |
 |
Obviously, another advantage of us supplying the console to you as a blank moulding is that it allows you to reuse any existing switches you may already have installed in your vehicle.
Please note that the MUD Dash Console does not come
with switches/gauges.
The MUD Console also provides the ideal spot for mounting a CB radio. The compact Midland 98 unit illustrated above has been mounting into the console using a dedicated Midland DIN mount.
Using a DIN mount you have the choice of whether to install the CB in the upper or the location.
Alternatively, the unit is strong enough to hang a standard U-shaped CB mounting bracket off the lower edge of the console.
For CB DIN mounts and all your CB related hardware and advice contact the UK's leading 4x4 CB radio specialists at Communication Eleven.
Commercial operators will also note that the MUD Defender Replacement Console provides the perfect way of mounting the latest generation of
DIN sized tachograph in the Defender cabin.

Overall Console Width 355mm |

Lower Recess W: 190mm x H: 126mm |

Upper Recess W: 190mm x H: 58mm
|

Picture illustrating the section of the of lower dash tray that
needs to be cut away. |

Mounting frame screws to the rear of dash.
No cutting of vent panel trim necessary. |
Designed and manufactured in the UK, the MUD Defender Replacement Console is moulded from tough ABS plastic and even sports a textured finish that replicates the OE finish on the Defender dashboard.
The MUD Console will fit both Right Hand Drive and Left Hand Drive Defenders.
Fitting Instructions
Customer Installation Gallery
Here is a gallery of how our customers have installed the MUD Centre Console.
How to Pay You can place your order by telephoning MUD-UK, Monday to Friday between the hours of 9am & 5pm (GMT) on +44 (0) 1422 881951.
Payment details
We accept Mastercard, Switch, Maestro, Visa Electron, Solo, Visa and JCB.
Overseas customers can pay via PayPal. Contact us first for a shipping quote.
We also accept payment by cheque and postal order.
|